Product Details:
Minimum Order Quantity | 1 Piece |
Output | Depends upon model |
Packaging Type | Powder |
Voltage | Depends upon model |
Automation Grade | Automatic |
Brand | Adinath |
Condition | New |
Salient Features:
Technical Specification:
Model | APF-120 |
Production Rate | 30 to 120 Vials or Bottles/Minute |
Input Specification Container Diameter: Container Height Rubber Stopper: |
25mm to 38mm 36mm to 75mm 20mm, 28mm & 30mm Butyl |
Fill Capacity | 50 mg. to 1.5 gms with the help of change parts. Up to 6 gms filling by multiple dosing. |
Accuracy: | ± 1% depending upon consistency and uniformity of bulk density of Injectable Powder under controlled level of humidity (Below 28% Rh) |
Optional Accessories:
| Pure Air Filter, Vacuum Pump Oil Free Air Compressor Online Pre-Media Filling Arrangement Programmable Logic Control (System) with MMI Aluminum Profile Cabinet covering full machine |
Utility: Compressed Air: Vacuum: Relational Humidity: |
Max. 2 Kg./Cm² Oil Free 25 Hg. @ 300 LPM Displacement Below 28% |
Overall Dimension: | 2100mm (L) X 842mm (W) X 1700mm (H) |
| (Dimension include main machine with in-feed turn table) |
Note: Electrical characteristics can be adjusted as per customer’s requirements.
* Rights of technical improvement & modification reserved.
* Illustration & dimensions are shown for information purpose only.
Additional Information:
Product Details:
Model | 300 hole |
Automation Grade | Manual |
Weight | 50 Kgs. |
Brand | Adinath |
Capacity | Up to 6000 Capsules/hour |
Material | Gelatin Capsule |
Production Output: | 55000 to 60000 capsules / 8 hour shift |
Loading Plate: | 25 X 12 = 300 holes |
Interchangeability: | 00/0/1/2/3/4/5 size capsules |
Length: | 405mm |
Width: | 300mm |
Height: | 455mm |
Net Weight: | 40 kgs Approx. |
Gross Weight: | 55 kgs. Approx. |
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Max Load | Depends upon model |
Model | ACE |
Capacity | Depends upon model |
Cabin finish | Stainless Steel |
Max Persons | Depends upon model |
Operating Height | Depends upon model |
Drive Technology | Mechanical |
Material | Stainless steel |
Warranty | 12 Months |
Machine Room | Not Required |
Door Style | Automatic |
Features | Depends upon model |
Area of Cabin | Depends upon model |
Usage/Application | Automatic |
AMC/After Sales Service | Provided |
Maximum Person | Depends upon model |
Maximum speed | Depends upon model |
Door Dimensions | Depends upon model |
Application | Automatic |
Installation Provided | Yes |
Condition | New |
AUTOMATIC | CAPSULE ELEVATOR |
Description | Specification |
Model | TCE-200 |
Electric Load | 0.4 kw |
Power Characteristics | 240 volts, Single Phase, 50 Hertz |
Discharge Height | 1900 mm and 2300 mm |
Machine Length | 1570 mm |
Machine Width | 1037 mm |
Machine Height | 2370 mm or 2720 mm |
Additional Information:
Product Details:
Automation Grade | Automatic |
Design Type | Standard |
Capacity | 500 Liters approx. |
ü Designed for atmospheric operations.
ü If dictated by process conditions, highly polished internal surfaces can be provided.
ü Provision for measuring of product temperature can be provided, if required.
ü Beacing mounting on-outside of mixing container to avoid contamination.
ü Dust-proof model.
ü Teflon braided packing.
ü Single speed drive.
Additional Information:
Product Details:
Minimum Order Quantity | 1 Unit |
Brand | Adinath |
Capacity | Depends upon model |
Model | ASLM |
Automation Grade | Automatic |
Driven Type | Mechanical |
Voltage | Depends upon model |
Condition | New |
Type | Ampoule |
Dimension | Depends upon model |
Ampoule Labeling Machines is suitable for the labels on filled & sealed glass ampoule. This compact cGMP model is most preferred choice of medium & large scale injectable units in pharmaceutical industry.
Salient Features:
Technical Specification:
Model | AASL-120 |
Production Rate | Up to 120 Ampoules/Minute |
Ampoule Range | 1ml to 20ml |
Label Length: | 12mm to 50mm |
Label Width: | 8mm to 60mm |
Label Roll Dia.: | 300mm/400mm |
Core Dia.: | 75mm/76mm |
Power Specification | 0.75 H.P. |
Electrical Characteristics | 230 Volts, Single Phase 400/750W Servo Motor with encoder |
Overall Dimension | 1150mm (L) x 1000mm (W |
Additional Information:
Product Details:
Minimum Order Quantity | 1 Unit |
Brand | Adinath |
Material | Ampoule Vial |
Automation Grade | Automatic |
Voltage | Depends upon model |
Model | AWM |
Capacity | Depends upon model |
Power | Depends upon model |
Model | AVRW-120 |
Production Rate | 60 to 120 Ampoules/Minute |
Input Specification | 1ml to 10ml ampoules |
Power Specification | 3 H.P., 3 Phase 50 Hertz, 4 wire system |
Optional Accessories | Programmable Logic Control (System) with MMI Aluminum Profile Cabinet covering full machine |
Utility | Air – 20 CFM Water – 200 to 500 liter per hour depend upon container size |
Water Tank & Pump | 3 nos. each with 25 Liters Capacity & Centrifugal pump |
Overall Dimension | 2050mm (L) X 1900mm (W) X 1210mm (H) |
Additional Information:
Product Details:
Minimum Order Quantity | 1 Unit |
Brand | Adinath |
Material | Roatry |
Automation Grade | Automatic |
Voltage | Depends upon model |
Model | RAWM |
Capacity | Depends upon model |
Power | Depends upon model |
Model: | AVRW-120 |
Production Rate: | 60 to 120 Ampoules/Minute |
Input Specification: | 1ml to 10ml ampoules |
Power Specification: | 3 H.P., 3 Phase 50 Hertz, 4 wire system |
Optional Accessories: | Programmable Logic Control (System) with MMI Aluminum Profile Cabinet covering full machine |
Utility: | Air – 20 CFM Water – 200 to 500 liter per hour depend upon container size |
Water Tank & Pump: | 3 nos. each with 25 Liters Capacity & Centrifugal pump |
Overall Dimension: | 2050mm (L) X 1900mm (W) X 1210mm (H) |
Additional Information:
Product Details:
Minimum Order Quantity | 1 Unit |
Capacity | Depends upon model |
Max Design Pressure | Depends upon model |
Material | Stainless Steel |
Brand | Adinath |
Orientation | Vertical |
Automation Grade | Automatic |
Condition | New |
Pharmaceutical Reaction Vessels
High Pressure Reaction Vessels is manufactured utilizing high grade stainless steel (SS304 and SS316). Our offered range of vessel is generally used in chemical and pharmaceutical industries. These vessles available in capacity ranging form 10 kilo litres to 100 kilo litres.
These are widely appreciated for sturdy construction, temperature resistant, non-corrosive and maintenance free attributes. Further, to meet the various requirements we are also offering chemical reaction vessel, mild steel reactor vessel, stainless steel chemical reactor vessel and stainless steel reaction vessel.
We manufacture customized Pressure Vessels, Mixing Tanks and Reactors. These are generally made of SS 304/316 material and have features including:
Design as per ASME standard.
» Option for Variable speed drive.
» Option for Mechanical seal instead of conventional stuffing box with gland packing.
» Provision for inert gas medium.
» Provision for rupture disc.
» Provision to measure both jacket as well as liquid temperature at different levels of the vessel.
» The vessel can normally withstand a vacuum of 650 – 700 mm of Hg. and 3 bar above atmospheric.
Reaction Vessel is uses in
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Material | Stainless Steel |
Usage/Application | Coating Food Materials |
Capacity | 250 Litres |
Grade | SS-316 |
Automation Grade | Semi-Automatic, Automatic |
Machine Type | Automatic |
Hot Air Fan Capacity | 350 CFM |
Product Details:
Minimum Order Quantity | 1 Unit |
Capacity | Up to 200 BPM |
Power Consumption | 2 H.P. |
Material | Stainless Steel |
Electric Load | 2 K.W. |
Finishing | Premium |
Driven Type | Electric |
Packaging Type | Product & Transport Worthy |
Usage/Application | Industrial |
Automation Grade | Automatic |
Brand | Adinath |
Features of Pharma Liquid Filling Machine
ü Compact & elegant design.
ü Suitable to fill 10ml to 2000ml.
ü Piston pump filling with accuracy of ±1%.
ü No cross contamination.
ü All Contact Parts Made from S.S 316 & framework by S.S. 304.
ü A.C. Variable Drive for speed adjustment.
ü “No Bottle - No Filling” system.
ü Easy to operate.Technical Specification of Liquid Filling Machine
Model No. | AI-BFM 4 | AI-BFM 8 | AI-BFM 12 |
Bottle Diameter | Up to 90 mm* | Up to 90 mm* | Up to 90 mm* |
Filling Range | 10 ml to 1000 ml with help of suitable change parts / Syringe | 10 ml to 1000 ml with help of suitable change parts / Syringe | 10 ml to 1000 ml with help of suitable change parts / Syringe |
Accuracy | +/- 1% Depending on Liquid with Single Dose | +/- 1% Depending on Liquid with Single Dose | +/- 1% Depending on Liquid with Single Dose |
Electrical | 440 Volts, 3 Phase Power Supply (50 Hz) | 440 Volts, 3 Phase Power Supply (50 Hz) | 440 Volts, 3 Phase Power Supply (50 Hz) |
Power | 2 H.P. | 3 H.P. | 5 H.P. |
Production Output | Up to 60 Bottles per minute | Up to 120 Bottles per minute | Up to 180 Bottles per minute |
Syringe Filling Range | 10ml to 50ml,50ml to 100ml, 100ml to 250ml and 250ml to 500ml | 10ml to 50ml,50ml to 100ml, 100ml to 250ml and 250ml to 500ml | 10ml to 50ml,50ml to 100ml, 100ml to 250ml and 250ml to 500ml |
Additional Information:
Product Details:
Minimum Order Quantity | 01 Unit |
Material | Mild Steel |
I Deal In | New Only |
Voltage | 380 V |
Is It Portable | Portable |
Phase | Three Phase |
Automation Grade | Automatic |
Usage/Application | Laboratories |
Frequency | 60 Hz |
Capacity | 10 Kg |
Motor Power | 3 HP |
Lab Stirred Ball Mill is a kind of super fine grinding equipment for laboratory usage. It is in reasonable structure, convenient operation, high efficiency and energy saving. The size of material after grinding is less than 1um. It is suitable for the super fine powder produce for the laboratory testing of the industry of mining , mineral processing, chemical engineering, grinding material, ceramics, painting, powder metallurgy, magnetic materials, etc. Laboratory Ball Mill is primarily designed for grinding pigments. The material
Additional Information: